[ 100% Correct ] eSim – Spoken Tutorial Quiz Answers

eSim Spoken Tutorial Quiz Answers – In this blog post we have provided the answers of eSim course of Spoken Tutorial.

Q1. The default drill hole size and shape for different footprints may vary.

Select one:

(A) True

(B) False

Ans:- (A) True

Q2. Design Rules Check(DRC) is done prior placing the tracks and filling ground plane.

Select one:

(A) True

(B) False

Ans:- (A) True

Q3. CvPCB associates components with footprints.

Select one:

(A) True

(B) False

Ans:- (A) True

Q4. The dot cir file shows the netist file of the schematic. It contains the information about the node connections and values of components.

Select one:

(A) True

(B) False

Ans:- (A) True

NOTE:- Answers Will be Uploaded Shortly And It Will Be Notified On Telegram, JOIN NOW

Introduction to Computers – Spoken Tutorial Quiz Answers

Q5. User can remove or add parameter in the existing diode model.

Select one:

(A) True

(B) False

Ans:- (A) True

Q6. After launching Pcbnew, we do the following:

Select one:

(A) None of them

(B) Read the .net netlist

(C) Read the .cir netlist

(D) Read the .brd netlist

Ans:- (B) Read the .net netlist

Q7. To convert airwires into tracks, which one of the following tools is selected:

Select one:

(A) Zone

(B) Keepout area

(C) Footprint

(D) Track

Ans:-

Q8. What method have we used to interconnect all the ground (GND) nodes while creating a PCB Layout?

Select one:

(A) Ground Plane

(B) Wires

(C) None of them

(D) Track

Ans:-

NOTE:- Answers Will be Uploaded Shortly And It Will Be Notified On Telegram, JOIN NOW

Q9. Under which tab the newly created device model is specified in the kicadtoNgspice convertor ?

Select one:

(A) Analysis Parameters

(B) Device Modelling

(C) Source Details

(D) Subcircuits

Ans:- (B) Device Modelling

Q10. eSim can be opened through terminal by typing:

Select one:

(A) Ctrl+Alt+T and type eSim and press enter

(B) Terminal and press enter

(C) Alt+Ctrl+E and press enter

(D) Ctrl+Alt+ X and type eSim and press enter

Ans:- (A) Ctrl+Alt+T and type eSim and press enter

Introduction to Computers – Spoken Tutorial Quiz Answers

Q11. If an external library is uploaded using the ‘Upload’ option, by default it is saved in,

Select one:

(A) User Libraries Directory

(B) Subcircuit directory

(C) Diode directory

(D) None of them

Ans:- (A) User Libraries Directory

Q12. By default the project files created in eSim will be stored in ?

Select one:

(A) C:/ drive

(B) Home Directory

(C) User specified Directory

(D) eSim-Workspace

Ans:- (D) eSim-Workspace

Q13. Sources are replaced by which of the following components:

Select one:

(A) Inductors

(B) Batteries

(C) None of them

(D) Connectors

Ans:-

NOTE:- Answers Will be Uploaded Shortly And It Will Be Notified On Telegram, JOIN NOW

Q14. Which of the following ERC error is asked to ignore while performing ERC on the schematic?

Select one:

(A) Mismatch between hierarchical labels and pins sheets

(B) Global label not connected to any other global label

(C) Two labels are equal for case insensitive comparisons

(D) Pin not connected and no No Connect Symbol

Ans:-

Q15. Board Outline is drawn on which one of the following layers listed below in this tutorial?

Select one:

(A) Bottom Copper(B.Cu)

(B) Front Silk(F.Silks)

(C) Margin Layer

(D) Edge.Cuts

Ans:-

Introduction to Computers – Spoken Tutorial Quiz Answers

Q16. On which one of the following, is our PCB design transferred to?

Select one:

(A) FR4 grade copper cladded sheet

(B) Butter Paper

(C) Sheet of Stainless Steel

(D) Aluminium Sheet

Ans:- (A) FR4 grade copper cladded sheet

Q17. Interconnected footprints are represented by which one of the following:

Select one:

(A) Buses

(B) Edges

(C) Airwires

(D) Tracks

Ans:-

Q18. To plot Gerber Files, which of the following tools have to be called:

Select one:

(A) Read Netlist

(B) Footprint Editor

(C) DRC

(D) Plot window

Ans:-

NOTE:- Answers Will be Uploaded Shortly And It Will Be Notified On Telegram, JOIN NOW

Q19. Which of the following combination of components is placed at the node where we want to see voltage levels?

Select one:

(A) plot_i2 and a hierarchical label

(B) plot_v and a global label

(C) plot_db and a hierarchical label

(D) plot_log and a global label

Ans:- (B) plot_v and a global label

Q20. Which of the following unit of dimensions is selected when generating drill files(Done in the Drill Units section)?

Select one:

(A) Centimeters

(B) Inches

(C) Yards

(D) Millimeters

Ans:- (D) Millimeters

Introduction to Computers – Spoken Tutorial Quiz Answers

Q21. Which of the following filters to be used while filtering footprints in the Cvpcb tool:

Select one:

(A) Filter the footprints by keywords

(B) Filter the footprints by pin count

(C) Filter footprints list by library

(D) Filter the footprints by shape

Ans:-

Q22. To place a resistor on the schematic editor, we need to select which button?

Select one:

(A) Open bus

(B) Place bus

(C) Select component

(D) Place component

Ans:- (D) Place component

Q23. In eSim, PWR_Flag is connected to?

Select one:

(A) None of them

(B) Input pins

(C) Power pins

(D) Output pins

Ans:-

Q24. While creating a PCB Layout, GND plane is added on which layer?

Select one:

(A) Margin Layer

(B) B.Cu layer

(C) F.Silks Layer

(D) F.Cu layer

Ans:- (B) B.Cu layer

Q25. Select the appropriate choice

Select one:

(A) Ground Plane outline should be inside the board outline

(B) Ground plane outline should lie exactly on top of the board outline

(C) None of them

(D) Ground plane outline should be outside the board outline

Ans:-

NOTE:- Answers Will be Uploaded Shortly And It Will Be Notified On Telegram, JOIN NOW

2 thoughts on “[ 100% Correct ] eSim – Spoken Tutorial Quiz Answers”

  1. All the answers provided on this page are best of our knowledge and are obsolutely corect, If you know the answers please comment with your opinion. we encourage your support to us. Thanks

Leave a Comment