NPTEL Air Pollution and Control Assignment 4 Answers

NPTEL Air Pollution and Control Assignment 4 Answers 2022:- All the Answers provided here to help the students as a reference, You must submit your assignment at your own knowledge.

Q1. The Gaussian plume model-based estimations of the concentrations of a pollutant are not reliable beyond the radius of approximately _________

a) 15km
b) 20km
c) 25km
d) 30km

Q2. In the downwind direction from an air pollution source, with the increasing distance, the lateral and vertical dispersion coefficients will

a) Remain constant
b) Decrease
c) Increase
d) Initially increase and then decrease

Q3. Which of the following is not an example of line source of air pollution?

a) Motor Vehicles travelling along a straight section of a highway
b) Agricultural burning along the edge of a field
c) Fire in a large area of a forest
d) A line of industrial sources on the bank of a river etc

Answer:- c) Fire in a large area of a forest

Q4. The expression for determination of concentration (C) of a pollutant using Gaussian dispersion model for a line source is given as:

Q5. Sulfur dioxide is emitted at a rate of 150 g/s from a stack with an effective height of 60 m. The wind speed at stack height is 5 m/s, and the atmosphere stability class is D for the overcast day. (Given, σ= 38 m and σ= 19 m). Ground-level concentration along the center line at a distance of 500 m from the stack, in micrograms per cubic meter (µg/m3).

a) 40 µg/m3
b) 60 µg/m3
c) 90 µg/m3
d) 100 µg/m3

Q6. Estimate the total hydrocarbon concentration at a point 300 m downwind from an expressway at 5:30 P.M on an overcast day. The wind is perpendicular to the highway and has a speed of 4 m/s. The traffic density along the highway is 8000 vehicles per hour, and the average vehicle speed is 40 mi/hr. The average vehicle emission rate of hydrocarbons is 2×10-2  g/s.

a) 32 µg/m3
b) 42 µg/m3
c) 28 µg/m3
d) 58 µg/m3

Q7. ___________ is the product of maximum mixing depth/height and the average wind speed within the mixing layer for a given region.

a) Ventilation Coefficient
b) Pollutant Concentration
c) Pollution potential
d) Atmospheric stability

Q8. ________________ of an air environment is the maximum amount of pollution load that can be discharged into it without violating the best designated use of the air resource in the planning region.

a) Assimilative capacity
b) Airshed
c) Ventilation coefficient
d) None of the above

Q9. __________ is an average representative value that is related to the quantity of an air pollutant released to the atmosphere due to a particular activity.

a) Correction factor
b) Activity Data
c) Assimilative capacity
d) Emission factor

Q10. The basic equation for estimating the emissions from a particular sector is given as the product of :

a) Activity data and Emission factor
b) Activity data and Concentration of a pollutant
c) Emission factor and Average wind speed
d) Emission factor and Concentration of a pollutant